Project Examples
Industrial and Equipment Placement Examples
1 min readUpdated July 2026
Setting machinery is a precision job. The lift is often short and the load is often well inside capacity. What takes the time is landing the equipment exactly on its anchors or its pad, level, without shock loading it as it touches down.
The soft set
A soft set means bringing the load down slowly enough that it settles rather than lands. Sensitive equipment does not like being dropped the last two inches, and anchor bolts do not like being hit sideways.
That is a function of hydraulic control and an operator who is watching the right thing. It is also a reason to have someone at the pad guiding, because from the seat you cannot see a bolt pattern clearly at distance.
Generators, tanks and top-heavy loads
A generator wants a level pad, because vibration isolators sit wrong on a pad that is out and the consequence shows up months later as a cracked mount. We check level before the unit comes off the trailer, not after it lands.
An empty tank is light and enormous. It behaves like a sail. Wind, not weight, governs those lifts, and on a breezy Havasu afternoon a large empty vessel is the load most likely to make us reschedule.
Boats, trailers and lakeside work
Havasu generates a steady amount of specialty lifting that is not construction at all: boats onto and off trailers, personal watercraft, storage-yard moves, and equipment offloads from flatbeds where no forklift can reach.
These are rigging problems more than capacity problems. A hull has specific lift points and a trailer is not one of them.
Answers
Frequently Asked Questions
Can you set a generator on a pad we already poured?
Yes. Confirm the pad is cured and level and tell us the unit weight and the anchor layout. We will land it on the bolts rather than near them.
Do you move equipment between sites?
We lift and place. We are not a hauling company, so transport is usually the customer's trucking. We can offload from a flatbed on arrival.
How precise can placement be?
Precise enough to land on anchor bolts, with someone at the pad guiding. Tell us up front if the tolerance is tight so we allow time for it.
More Project Types
- Heavy Lifting and Equipment PlacementMobile crane work that sets heavy equipment in its final position, once.
- Generator PlacementGenerator placement in Lake Havasu City, Arizona. We level the pad, spread the sling angle, and land the genset clean over the conduit stub ups.
- Machinery PlacementMobile crane machinery placement in Lake Havasu City, Arizona. Lathes, presses, and shop equipment rigged to frame lift points and set on the pad.
- HVAC and Mechanical LiftsHow we set rooftop package units, air handlers and condensers in Lake Havasu City, including a documented commercial unit swap.
- Truss and Structural WorkHow we sequence roof truss sets, beams and structural members with framing crews in Lake Havasu City and Mohave County.
- Spa and Residential LiftsHow we place spas and hot tubs over block walls and structures in Lake Havasu City backyards without damaging the property.
- Rigging and Construction Lift JobsHow we rig and set containers, machinery, roofing loads, solar racking, signs, poles, boats and boulders in Lake Havasu City and Mohave County.
- Tight Access ProjectsHow we work narrow lots, side yards and restricted setups in Lake Havasu City where a standard setup will not fit.
- Over Structure ProjectsHow we lift loads over houses, walls and patio covers in Lake Havasu City, and what has to be checked first.
Ready to schedule your lift?
Tell us the load, the site and the timing. We will confirm capacity, access and a window.