HCW Crane Service

Project Examples

Tight Access Lift Examples

1 min readUpdated July 2026

A tight access lift is one where the setup position is constrained, usually by lot width, walls, parked vehicles or overhead lines. The crane has to reach further from a worse position, which costs capacity. Planning the setup is most of the work.

What makes access tight in Havasu specifically

Many neighborhoods here were laid out with narrow side yards and block walls on both property lines. There is often no way in from the side at all, so the load goes over the top.

Streets on the hillside neighborhoods are narrower still, and some have a grade that limits where a truck can level up on outriggers. Those two things together are the usual reason a job needs a plan rather than a booking.

Reach costs capacity

Working from further away is not free. Rated capacity falls as the boom extends and the radius grows, so a load that a crane handles easily at close range may be at the edge of the chart from across the street.

This is exactly why capacity and reach have to be considered together rather than one at a time. Sometimes the answer is the larger crane not because the load is heavy but because the setup position is bad.

Answers

Frequently Asked Questions

My side yard is only a few feet wide. Can you still get a spa in?

Usually yes, by going over the wall or the house rather than through the side. That is the standard approach here.

What do you need to know to tell me if it will work?

A photo from the street showing the house and the route, and a rough distance from where a truck could park to where the load has to land.

Can you set up on a sloped street?

Often, within limits. The outriggers have to level the machine, and there is a point where the grade is too much. We check that before committing.

Ready to schedule your lift?

Tell us the load, the site and the timing. We will confirm capacity, access and a window.